Applies to: Infomir Linux/WebKit STBs explicitly covered by the USB-update guide
The useful distinctions
- The guide selects USB as the update method.
- The update file path is model-specific.
- Recognising a drive is not the same as validating its image.
Establish which firmware is appropriate
Infomir’s Linux/WebKit procedure is not a universal instruction for every device carrying the MAG name. Confirm the receiver model and whether its firmware is managed by an operator before obtaining an image. A similarly named download or another model’s folder is not sufficient evidence of a valid update for the device in hand.
Keep preparation separate from installation
The USB workflow involves a drive, a file path and an update-selection screen. Inspect those preparation stages before starting the actual firmware operation. A drive can be visible while the intended image is missing, misplaced or inappropriate. Keep a recovery plan and uninterrupted power available; do not use a firmware update as an exploratory response to an unverified service-account problem.
Read the displayed comparison
When the software-update interface identifies a candidate file, compare the information it displays with the intended model and source. Treat any mismatch or failed verification as a stop condition, not a prompt to rename unrelated files until one is accepted. Record the stage and exact message so that the manufacturer or operator can distinguish storage preparation from image compatibility.
A focused way to proceed
- Identify the exact receiver model and firmware authority.
- Obtain the legitimate model-matched update file.
- Prepare its path according to Infomir’s USB guide.
- Open the documented Software update screen and select USB.
- Verify the displayed file/model information before starting.
Worked example · synthetic
Hypothetical example: a USB drive appears in the receiver settings, but the selected image belongs to a different MAG model. The storage connection has succeeded while the update preflight has failed. Starting the operation would not be a valid test of the original player symptom.
When to stop or ask for help
Do not overwrite operator-managed firmware without its applicable instructions. Stop on an uncertain image source, model mismatch, missing recovery method or verification error and contact the responsible operator/manufacturer.